WoW | Mayline Safco VariTask E-Series Sit-To-Stand Desks | Enhance Your Posture and Well Being

You are here: Home > Enhance Your Workspace > Sit-to-Stand Desks > Mayline VariTask E-Series

We found 47 results matching your criteria.

Sit-To-Stand Desks - VariTask E- Series Height-Adjustable Workstations

When it comes to adjustable computer workstations, sit-to-stand desks, and height adjustable technical benches, Mayline has set the standard for innovation. The VariTask Adjustable Workstation was built out of the concept that workstations should be able to adjust to meet individual ergonomic needs - whether sitting or standing. The VariTask height adjustable computer desk technology, pioneered by the Mayline Company more than thirty years ago, provides work surfaces, even keyboard surfaces, that can be adjusted for height and angle. Today, VariTask Adjustable Workstations are offered in a wide range of sizes, styles and configurations to complement the most widely used office furniture systems.

Mayline E-Series Height-Adjustable Desks

VariTask E-Series Product Specifications

Base Structure:
All steel, construction. Columns are 16-gauge steel. Base assembly consists of welded 14-gauge legs with a12-gauge base spreader and structural 11-gauge base support. Top support is 9-gauge cold rolled steel. Decorative extruded aluminum trim panel is included. Adjustable column assembles to base assembly and top support using eight bolts (supplied) to allow for KD shipment and can ship via UPS (70 lbs.)

Drive System:
Electric 115 volt 60Hz AC input, 24V DC motor. No hydraulics, belts, weights or pulleys. System draws only 1.2 amps under full load. Capable of lifting 175 lbs. gross weight. Motor drives a steel Acme thread, linear actuator with gear reduction All components are U.L. recognized. Tested to 25,000 cycles without failure.

Glide System:
Patented glide system maximizes stability and alignment by compensating for off-center loads. No additional adjustment required throughout life cycle.

Travel Range:
16î of vertical adjustment, from 26î to 42î (with 1 1/8î thick top). Travel rate is 18 seconds (47î per minute).

Work Surfaces:
Standard surfaces are either thermally-fused melamine or high pressure laminate on 1î or 1-1/8î, respectively, medium density particle board core. Flexible PVC T-molding is standard edge treatment. Post-formed edge optional on laminate work surfaces. Rectangular or corner configurations are available in either single or dual surface. Numerous color finishes available to choose from.

Keyboard Mechanism (optional):
Optional DataCenter keyboard mechanism attaches to monitor surface to provide height adjustment 5î below to 7î above monitor surface. Full range of keyboard is 21î to 49î. Articulating mechanism also offers +15 degree to -15 degree tilt on the keyboard. Functional load is 100 lbs.

Paint Finish:
High solids polyester paint is 1.5 mil thick and baked at oven temperature of 300 degree F for a durable finish. Prior to painting, all components are cleaned via three-stage washer/sealer system.

Certifications:
Meets or exceeds appropriate ANSI/BIFMA x5.1-1993 standards.

Warranty:
Limited Lifetime Warranty against defects in material and/or workmanship for both base and work surface. Electro-mechanical components have ten (10) year warranty. See warranty for specific details and limitations.

Sort By:


	1