Home > Enhance Your Workspace > Sit-to-Stand Desks >

Mayline VariTask Workstation - E-Series - 650WL - 42" x 30" Corner Dual - HPL

Mayline VariTask Ergonomic Furniture
Mayline VariTask Workstation - E-Series - 42" x 30" Corner - Dual Surface DataCenter - HPL Surface - 650WL

Call VQV Interior Design Specialists
Now 877-878-8770
to find the furniture and accessories you need... with
Savings up to 70%

List Price: $4,227.00
Our Price: $2,210.20 FREE SHIPPING
You save $2,016.80!
Custom Field 1: E-SER.16INDC LAM.42X30 CRN W/D
Custom Field 3: 8/6/21

Availability:: Usually Ships in 1 to 2 Weeks
Product Code: 650WL

High Pressure Laminate (HPL)

Select HPL & Edge Combination:


Delivery Options*:
I Accept Back-of-Truck / Curb Side Delivery (Free)
Please Send Price for Inside Delivery
Please Send Price for Inside Delivery and Setup

Description Warranty Details Color & Fabric Combinations

VariTask E-Series Adjustable Workcenters

The ergonomic desks were built on the concept that workstations should be able to adjust to meet individual needs- whether sitting or standing. The series has been designed to meet the highest standards of functional and ergonomic performance with the most cost-effective adjustable workstations on the market.

  • Drive System: 110V, 60 H input, 24V DC motor. 150 lb. capacity.
  • Draws 1.2 amps under full load.
  • Travel Range: 16" of vertical adjustment from 26" to 42". Full travel time is 18 seconds.
  • Keyboard Surface: DataCenter mechanism adjusts from 8" below to 7" above work surface.
  • Both have +15ç to -15ç tilt. Work Surfaces: Thermally-fused low-pressure laminate with T-mold edge is standard.
  • The "L" suffix indicates high pressure laminate with T-mold edge (prices shown).
  • DataCenter Surface: Designated with a W in the model Number are 11"D x 27"W (minimum) for rectangular configurations.
  • Kwik-Ship Finishes: Black paint, Speckled Gray Matrix and Birch thermally-fused laminate.


VariTask E-Series Product Specifications 

Base Structure:

All steel, construction. Columns are 16-gauge steel. Base assembly consists of welded 14-gauge legs with a12-gauge base spreader and structural 11-gauge base support. Top support is 9-gauge cold rolled steel. Decorative extruded aluminum trim panel is included. Adjustable column assembles to base assembly and top support using eight bolts (supplied) to allow for KD shipment and can ship via UPS (70 lbs.)
Drive System:

Electric 115 volt 60Hz AC input, 24V DC motor. No hydraulics, belts, weights or pulleys. System draws only 1.2 amps under full load. Capable of lifting 150 lbs. gross weight. Motor drives a steel Acme thread, linear actuator with gear reduction All components are U.L. recognized. Tested to 25,000 cycles without failure.
Glide System:

Patented glide system maximizes stability and alignment by compensating for off-center loads. No additional adjustment required throughout life cycle.
Travel Range:

16” of vertical adjustment, from 26” to 42” (with 1 1/8” thick top). Travel rate is 18 seconds (47” per minute).
Work Surfaces:

Standard surfaces are either thermally-fused melamine or high pressure laminate on 1” or 1-1/8”, respectively, medium density particle board core. Flexible PVC T-molding is standard edge treatment. Post-formed edge optional on laminate work surfaces. Rectangular or corner configurations are available in either single or dual surface. Numerous color finishes available to choose from.
Keyboard Mechanism (optional):

Optional DataCenter keyboard mechanism attaches to monitor surface to provide height adjustment 5” below to 7” above monitor surface. Full range of keyboard is 21” to 49”. Articulating mechanism also offers +15 degree to -15 degree tilt on the keyboard. Functional load is 100 lbs.
Paint Finish:

High solids polyester paint is 1.5 mil thick and baked at oven temperature of 300 degree F for a durable finish. Prior to painting, all components are cleaned via three-stage washer/sealer system.

Meets or exceeds appropriate ANSI/BIFMA x5.1-1993 standards.

Limited Lifetime Warranty against defects in material and/or workmanship for both base and work surface. Electro-mechanical components have ten (10) year warranty. See warranty for specific details and limitations.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Enhance Your Workspace > Sit-to-Stand Desks
Computer Desks
Enhance Your Workspace > Sit-to-Stand Desks > Mayline VariTask E-Series
Enhance Your Workspace