 |
 |
 |
|
VariTask LT-Series Adjustable Workcenters These ergonomic desks were built on the concept that workstations should be able to adjust to meet individual needs- whether sitting or standing. The series has been designed to meet the highest standards of functional and ergonomic performance with the most cost-effective adjustable workstations on the market.
- Drive System: 110V, 60Hz AC input, 12V DC motor. 120 lb. capacity. Draws 1.6 amps under full load.
- Travel Range: 16.5" of vertical adjustment from 25" to 41.5"; Full travel time is 13 seconds.
- Keyboard Surface: DataCenter mechanism adjusts from 8" below to 7" above work surface and has a +15° to -15° tilt.
- Work Surface: Thermally-fused laminate with T-mold edge is standard. The "L" suffix is for high pressure laminate with T-mold edge (prices shown).
- DataCenter Surface: Designated by a W in the model number. 11"D x 27"W (minimum) for rectangular surfaces. 11.5"D x 15"W (minimum) for corner surfaces.
- Base Color: List prices shown are for black bases. The non-adjustable portion of the base can be painted in any of our Corporate Colors for a $50 List upcharge.
- Meets ADA standards.
- Kwik-Ship Finishes: Black paint, Speckled Gray Matrix and Birch Thermally Fused Laminate.
Mayline® Limited Lifetime Warranty
Mayline Group provides its Limited Lifetime Warrants to the original retail purchaser. The Mayline Group warrants that its labeled products will be free from defects in design, material and workmanship. The Mayline Group will repair the product or replace it with a comparable product free of charge, subject to the normal use provision. This warranty is valid for as long as the original customer owns and used the product.
Exceptions to this warranty include: Seating mechanisms, pneumatic cylinders, fabric and foam, which are warranted for one (1) year.
This warranty is void if the customer modifies the product, if attachments are made to the product, or if the product is not installed or used in accordance with Mayline Group's installation and application guidelines.
This warranty is the customer's sole remedy for product defect, and no other express or implied warranty is provided. Mayline Group shall not be liable for consequential or incidental damages arising from any product defect.
For warranty service, please contact Mayline Group at 800-822-8037 or 920-457-5537.
Low-Pressure, Thermally-Fused Laminates (TFL)
All thermally-fused laminates are available on the VariTask workstations. TFLÕs are shown with standard, default edging color. Edging and TFL colors can be mixed and matched at no additional charge but available only on written request.
VariTask Base Color Alternatives:
High Pressure Laminates (HPL) - Available at additional charge.
All high pressure laminates are available on the VariTask workstations. HPLÕs are shown with standard, default edging color. Edging and HPL colors can be mixed and matched at no additional charge but available only on written request. Over 400 additional Wilsonart ¨ and Nevamar¨ standard HPLÕs available at no additional upcharge. Maximum 4-week production lead time may apply.
|
|
|
 |
|
 |
|
|
|
